日本横河eja530e-jds4n-017en/ns21上海销售处
the “►” marks indicates the most typical selection for each specification. example: eja530e-das4n-012nn/¨.
*1: hart 5 or hart 7 is selectable. specify upon ordering.yokogawa gauge pressure transmitter eja530e-jds4n-012dl/d3
*2: users must consider the characteristics of selected wetted parts material and the influence of process fluids. the use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. it is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.yokogawa gauge pressure transmitter eja530e-jds4n-012dl/d3
be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°c [302°f] or above). contact yokogawa for detailed information of the wetted parts material.
*3: hastelloy c-276 or astm n10276.
*4: not applicable for combination of capsule code d and wetted parts material code h. threads are based on the withdrawn
din 16 288.
*5: not applicable for electrical connection code 0, 5, 7, 9 and a. content rate of copper in the material is 0.03% or less and content rate of iron is 0.15% or less.yokogawa gauge pressure transmitter eja530e-jds4n-012dl/d3
*6: not applicable for electrical connection code 0, 5, 7 or 9.
*7: material of a blind plug is aluminum alloy or 304 sst.
*8: not applicable for output signal code g.
*9: not applicable for output signal code f.
*10: 5 to 70 mpa (720 to 10150 psi) when /hg is specified.
the ‘#’marks indicate the construction materials conform to nace material recommendations per mr0175/iso 15156. please refer to the latest standards for details. selected materials also conform to nace mr0103.
hart/hart(1-5v)低功耗和foundation™现场总线或profibus pa通信协议。
规格
eja510e / eja530e 压力和压力变送器
a膜盒
b膜盒
c膜盒
d膜盒
测量范围
-100~200kpa
-0.1~2mpa
-0.1~10mpa
-0.1~50mpa
(-14.5~29psi)
(-14.5~290psi)
(-14.5~1450psi)
(-14.5~7200psi)
测量量程
10~200kpa
0.1~2mpa
0.5~10mpa
5~50mpa
(1.45~29psi)
(14.5~290psi)
(72.5~1450psi)
(720~7200psi)
精度
±0.055%
±0.055%
±0.055%
±0.055%
防护等级
ip66/ip67,nema 4x
防爆规格
nepsi ,fm,cenelec atex,csa,iecex
输出信号
4~20ma dc, brain, hart/hart(1~5v dc)低功耗,foundation™现场总线或profibus pa两线制数字通信
电源
brain和hart:10.5~42v dc(普通型和隔爆型) 10.5~32v dc(带避雷器) 10.5~30v dc(本安、n型,非易燃型)数字通讯(brain和hart: 小16.6v dc)hart( 1~5v):9~28v dc
fieldbus: 9~32v dc (本安entity模式:9~24v dc,本安fisco模式:9~17.5v dc)
环境温度
-40~85℃ (-40~185℉) (普通型)
-30~80℃ (-22~176℉) (内藏显示表)
过程温度
-40~120℃ (-40~248℉) (普通型)
过压
4mpa
4mpa
20mpa
60mpa
(580psi)
(580psi)
(8700psi)
(8700psi)
安装
直接安装/2-inch管安装
接液部件材质
膜盒
哈氏合金c-276
过程接头
sus316l,哈氏合金c-276
外壳
铸铝合金、抗腐蚀铸铝合金、astm cf-8m不锈钢
日本横河eja530e-jds4n-017en/ns21上海销售处
称重仪表在混凝土搅拌系统中的应用
【YD2302L】
蔬果干受市场青睐 这些干燥新技术提效又保质
烟气烟尘分析仪样品分析原理
吹瓶机的特点有哪些?
日本横河EJA530E-JDS4N-017EN/NS21上海销售处
阴阳混合离子交换树脂的原理与工作流程
金属热疲劳试验机的主要部件和使用方法
德国aeromatic AE20型电动执行器预测维护及故障分析
鄂尔多斯拉力测试带钩砝码,呼伦贝尔拉力测试带钩砝码
枣阳50T汽车衡(洪湖120T吊秤)保康200吨地磅基础预埋件施工要求
为什么使用超声波技术来绑定靶材就不需要助焊剂呢?
高功率光纤激光器生产厂商出厂品质监控介绍
二手滚筒烘干机用途
橡塑保温板厂家现货仓库地址
如何更好的操作卷板机,有些什么好方法?
节能无油螺杆鼓风机
旋转编码器的测速
关于扩建项目是否可以单独做应急预案
胶化时间大于15S的热固性粉末涂料胶化时间的测定