Take you to understａnd the steel plate protective cover layout and installation method!
the structure and layout of the machine tool protective cover should be planned reasonably, so that the human body can not directly enter the dangerous area. in order to prevent the injury caused by the fingertip passing by mistake, the opening width of the machine tool protective cover: diameter and side length or the short axis scale of the oval hole should be less than 6.5mm, and the safety distance should not be less than 35mm.
the high-speed steel plate protective cover has the characteristics of not afraid of foot stepping, no deformation in contact with hard objects, long life, good sealing and light operation. the protective cover has long travel, small compression, and the length ratio is 1:10. it is an advanced form of the folding protective cover, which can make up for the problems that can not be solved by various protective covers.
the steel plate protective cover is aligned with the middle flange at the two ends of the maintained part through the device, and is connected without contact with the maintained part. there are no metal parts in the shield, so there is no need to worry about serious wear and damage to the machine due to loose parts when the shield works. this method may be used if the shield is to be used at moderate temperatures.
哪些快递可以寄到菲律宾？
成都金相显微镜使用方法
福州到日本海运（福州海运物流）
美国西部到英国的海运路线（美国东部到西部海运）
宝钢两厚板新品双双*
Take you to understａnd the steel plate protective cover layout and installation method!
在线溶氧仪的精度和可重复性与什么有关？
防尘网的原理及特点
超声波物位计会受到那种因素的影响？
基于化工原理课程教学中创新教育的实践分析
砂石料行业发展趋势
自动封箱机胶带易出现哪些故障？
全自动顶空进样器厂家为你介绍两种测量方法原理
拉各斯海运：广州到拉各斯海运价格
触摸传感式拉发试验机！
防火封堵隔板防火板/质量这家靠谱
普碳钢多元素联测分析仪
工程地源热泵室外地埋管施工步骤是什么样的？
家具海运加拿大（海运家具到加拿大）
PD140PB04SRSSD2S100PB00
the high-speed steel plate protective cover has the characteristics of not afraid of foot stepping, no deformation in contact with hard objects, long life, good sealing and light operation. the protective cover has long travel, small compression, and the length ratio is 1:10. it is an advanced form of the folding protective cover, which can make up for the problems that can not be solved by various protective covers.
the steel plate protective cover is aligned with the middle flange at the two ends of the maintained part through the device, and is connected without contact with the maintained part. there are no metal parts in the shield, so there is no need to worry about serious wear and damage to the machine due to loose parts when the shield works. this method may be used if the shield is to be used at moderate temperatures.
哪些快递可以寄到菲律宾？
成都金相显微镜使用方法
福州到日本海运（福州海运物流）
美国西部到英国的海运路线（美国东部到西部海运）
宝钢两厚板新品双双*
Take you to understａnd the steel plate protective cover layout and installation method!
在线溶氧仪的精度和可重复性与什么有关？
防尘网的原理及特点
超声波物位计会受到那种因素的影响？
基于化工原理课程教学中创新教育的实践分析
砂石料行业发展趋势
自动封箱机胶带易出现哪些故障？
全自动顶空进样器厂家为你介绍两种测量方法原理
拉各斯海运：广州到拉各斯海运价格
触摸传感式拉发试验机！
防火封堵隔板防火板/质量这家靠谱
普碳钢多元素联测分析仪
工程地源热泵室外地埋管施工步骤是什么样的？
家具海运加拿大（海运家具到加拿大）
PD140PB04SRSSD2S100PB00