Aqua-Poly/Mount说明书
产品描述
aqua-poly/mount is a water-soluble, non-fluorescing, non-permanent, aqueous mounting medium formulated for mounting sections directly from aqueous solutions. it is useful for immunofluorescent techniques as it enhances and retains fluorescent stains.
aqua-poly/mount can also be used for frozen sections, fat stains and immuno-stains where aqueous mounting media is required. aqua-poly/mount can be used with most fluorescent dyes and stains including dab, alkaline phosphatase-fast red, aec (aminoethylcarbazole) and other chromogens that are alcohol soluble or incompatible with organic solvents.
aqua-poly/mount solidifies under the coverslip after 24-48 hours at a relative humidity of 20-50%. after it dries completely it forms a solid, clear seal that facilitates handling and storage, making painting of the coverslip edges unnecessary. aqua-poly/mount can be used on automated coverslippers in place of traditional solvent based coverslipping medium.
使用方法
使用方法
prepare slides as required. prior to coverslipping rinse the slides in distilled or deionized water. the excess fluid can be drained, but blotting is not recommended. aqua-poly/mount is supplied in convenient 20ml dropper bottles for manual staining and in larger volumes for automated coverslippers.
apply two drops of aqua-poly/mount to the slide at the end or over the tissue. carefully lower the coverslip at an angle while gently applying pressure to force any excess medium and air bubbles away from the tissue and out from under the coverslip. it is helpful to draw the coverslip to the edge of the coverslipping medium and then lower it slowly while applying pressure. gently tilt the slide to remove any medium at the edges of the slide and coverslip. the slide can be viewed immediately or after drying. slides can be dried at room temperature or at 4°c. drying at 4°c will increase drying times. do not heat the slides as this can damage or fade some stains or reactions. slides containing fluorescent chromogens should be stored in the dark.
aqua-poly/mount can be used on automated coverslippers in place of traditional solvent based coverslipping medium. the viscosity of the medium may require adjusting for proper flow rates. allow the liquid to come to room temperature before making any adjustments for flow rate as the viscosity will change. the amount of medium dispensed will effect the drying time. thicker sections will require more coverage with medium to assure the coverslip remains in place against the slide surface.
货号 品名 规格 品牌
78oc10006-20ml aqua-poly/mount 20ml biohub
美国SEL保护继电器的介绍
本安防爆技术及其系统
721分光光度计使用步骤
空气等离子切割机电气故障排除
南宁机场新增8条国际货运航线
Aqua-Poly/Mount说明书
ADN-40-I-P-A维修包/密封件/易耗件现货ADN
气体采样袋的气体渗透性能检测方法
如何快速区分恒温恒湿试验机的优劣要点
去德国汉堡港用哪一种货运方式
了解一下间充质干细胞培养基的使用方法及注意事项吧
大型恒温恒湿试验箱的五大系统
闲置3吨搪瓷反应釜回收价格
地埋式污水处理设备的安装维护解说
美国海运船代码查询网（美国海运船公司官网）
D31FBB32DC5NS00型美国PARKER控制阀日常维护
KF40RF2-D15工作原理急性能参数
Rexroth力士乐叶片泵PV7-1X/10-14RE01MC0-16 R900580381工作原理
显示面板制造商清越科技闯关科创板IPO
Facebook将于10月1日起关闭直播购物功能
aqua-poly/mount is a water-soluble, non-fluorescing, non-permanent, aqueous mounting medium formulated for mounting sections directly from aqueous solutions. it is useful for immunofluorescent techniques as it enhances and retains fluorescent stains.
aqua-poly/mount can also be used for frozen sections, fat stains and immuno-stains where aqueous mounting media is required. aqua-poly/mount can be used with most fluorescent dyes and stains including dab, alkaline phosphatase-fast red, aec (aminoethylcarbazole) and other chromogens that are alcohol soluble or incompatible with organic solvents.
aqua-poly/mount solidifies under the coverslip after 24-48 hours at a relative humidity of 20-50%. after it dries completely it forms a solid, clear seal that facilitates handling and storage, making painting of the coverslip edges unnecessary. aqua-poly/mount can be used on automated coverslippers in place of traditional solvent based coverslipping medium.
使用方法
使用方法
prepare slides as required. prior to coverslipping rinse the slides in distilled or deionized water. the excess fluid can be drained, but blotting is not recommended. aqua-poly/mount is supplied in convenient 20ml dropper bottles for manual staining and in larger volumes for automated coverslippers.
apply two drops of aqua-poly/mount to the slide at the end or over the tissue. carefully lower the coverslip at an angle while gently applying pressure to force any excess medium and air bubbles away from the tissue and out from under the coverslip. it is helpful to draw the coverslip to the edge of the coverslipping medium and then lower it slowly while applying pressure. gently tilt the slide to remove any medium at the edges of the slide and coverslip. the slide can be viewed immediately or after drying. slides can be dried at room temperature or at 4°c. drying at 4°c will increase drying times. do not heat the slides as this can damage or fade some stains or reactions. slides containing fluorescent chromogens should be stored in the dark.
aqua-poly/mount can be used on automated coverslippers in place of traditional solvent based coverslipping medium. the viscosity of the medium may require adjusting for proper flow rates. allow the liquid to come to room temperature before making any adjustments for flow rate as the viscosity will change. the amount of medium dispensed will effect the drying time. thicker sections will require more coverage with medium to assure the coverslip remains in place against the slide surface.
货号 品名 规格 品牌
78oc10006-20ml aqua-poly/mount 20ml biohub
美国SEL保护继电器的介绍
本安防爆技术及其系统
721分光光度计使用步骤
空气等离子切割机电气故障排除
南宁机场新增8条国际货运航线
Aqua-Poly/Mount说明书
ADN-40-I-P-A维修包/密封件/易耗件现货ADN
气体采样袋的气体渗透性能检测方法
如何快速区分恒温恒湿试验机的优劣要点
去德国汉堡港用哪一种货运方式
了解一下间充质干细胞培养基的使用方法及注意事项吧
大型恒温恒湿试验箱的五大系统
闲置3吨搪瓷反应釜回收价格
地埋式污水处理设备的安装维护解说
美国海运船代码查询网（美国海运船公司官网）
D31FBB32DC5NS00型美国PARKER控制阀日常维护
KF40RF2-D15工作原理急性能参数
Rexroth力士乐叶片泵PV7-1X/10-14RE01MC0-16 R900580381工作原理
显示面板制造商清越科技闯关科创板IPO
Facebook将于10月1日起关闭直播购物功能